Industrial dust- and waterproof luminaires
In basic version (without gear tray) with 1 and 2 fluorescent tubes for T8 lamps or with LED-tubes.
In version with gear tray with LED or 1 and 2 fluorescent tubes for T5 or T8 lamps
Your main benefits: Beauty and functionality go hand in hand with reasonable price. Thanks to its special construction this model offers you an additional price advantage: It can be used without any gear tray (the electrical components are mounted onto the housing directly). A clever solution.
Full range available in T8, T5, LED, IP 65
LED termék: 
0
UNIQUE termék: 
0
10::Dust-tight, protected against jet water
14::Dust-tight
20::Protected against jet water
13::Luminaires with this mark are suitable for direct mounting on normal flammable building materials, according to DIN 4102 or similar materials, which have an ignition temperature of at least 200°C
12::Luminaires bearing this symbol have limited surface temperature and are suitable for use in premises which are susceptible to dust and fibres
25::Glow wire test 850 °C
17::T8 fluorescent tube Ø26mm with G13 lampholder
16::T5 fluorescent tube Ø16mm with G5 lampholder
21::Luminaires equipped with magnetic control gear
4::Luminaires equipped with high frequency control gear
5::Luminaires equipped with high frequency, dimmable control gear
26::Equipped with LED
1::1 phase through wiring
2::3 phase through wiring
3::Luminaires with emergency module
22::The product meets the valid technical requirements applied in the countries of Europe
Technical description: 
Field of application:
Thanks to the construction principles of gasket, closing system and diffuser our waterproof light fixtures ensure a high grade of protection (IP 65) against dust, contamination and water permeation. In accordance with their IP grade they can be widely used to illuminate spaces with dusty, humid environment.

In order to reach the optimal cost-performance ratio the basic version of 746-Clever has been developed without gear tray. The electrical components are mounted directly into the housing. When using outdoors, the fittings should be protected against direct sunlight and adverse weather conditions.

Housing: It is made of flame retardant glass-fibre reinforced polyester (on request suitable for 850°C glow wire test too), in light grey (RAL7035) colour. This material has very good temperature resistance, mechanical stability, furthermore it is a good electrical insulator, it resists the impacts of several chemicals and the impacts of weather conditions. Its stability of size and shape at changing temperatures is excellent.

The diffuser is available as follows: Injection moulded acrylic (PMMA) in two versions:
  1. transparent, with longitudinal prisms.
  2. light opalescent, designed with respect to their optical characteristics, made with photo etching.
Main advantages of PMMA: Very good transparency (better than the transparency of glass), unique non-aging properties, chemical and UV-resistance. Injection moulded polycarbonate (PC). Main advantages: high mechanical strength and high heat and shock resistance and excellent transparency. The PC diffusers are made with optically designed longitudinal, internal prisms and are UV resistant.

The gasket between the diffuser and housing is made of non-aging PU (Polyurethane) foam. As option gasket with enhanced resistance is available.

Fixing the diffuser to the body: with highly resistant clips made of polyamide or with stainless steel clips

Gear tray (reflector): As option white powder coated steel sheet gear tray or glossy aluminium reflector is available.

Way of installing: direct (with screws) onto the wall or ceiling resp. suspended.

Electrical components: in basic version (without gear tray) low power factor or electronic control gear in T8.

In case of construction with gear tray, in accordance with the requested specification: LED, low power factor, high power factor or electronic control gear in T8 or T5.

On request available as unassembled sets (without electrical components).
Technical Data: 

746-Clever T8 T5-TD.jpg

Palletisation: 
Parameters of the mounted luminaires 
 
  Length Width Height cubic centimeter cubic meter   pcs/pal. (truck) pal./truck pcs/pal. (cont.) pal./20ft cont. pal./40ft cont.
746-Clever
1x18W  683 90 72 4425,8 0,0044   220 54 200 24 48
1x36W  1295 90 72 8391,6 0,0084   110 60 100 24 54
1x58W  1595 90 72 10335,6 0,0103   110 48 100 20 42
2x18W  683 116 72 5704,4 0,0057   176 54 160 24 48
2x36W  1295 116 72 10815,8 0,0108   88 60 80 24 54
2x58W  1595 116 72 13321,4 0,0133   88 48 80 20 42
                       
  The parameters specified (L, W, H) are given in millimeters and identical to the external of box dimensions.
  The outer box dimensions of the T5 version are same as the dimensions of the above mentioned T8 version.