With 1 or 2 fluorescent tubes in T8 or T5
Your main benefits: A professional solution especially for outdoor applications. 771-Ventila withstands the impact of adverse weather conditions (sunlight, rain, wind etc.).
Ta = -20…+25°C
Conditions for applications at negative temperatures:
- cold-resistant fluorescent tube, (e.g. Polar)
- cold-resistant starter.
Full range available in IP65 or IP66
LED termék: 
0
UNIQUE termék: 
0
10::Dust-tight, protected against jet water
14::Dust-tight
20::Protected against jet water
13::Luminaires with this mark are suitable for direct mounting on normal flammable building materials, according to DIN 4102 or similar materials, which have an ignition temperature of at least 200°C
12::Luminaires bearing this symbol have limited surface temperature and are suitable for use in premises which are susceptible to dust and fibres
30::Protected against powerful water jets (heavy seas)
7::Luminaires with this symbol are protection isolated (Protection class II)
5::Luminaires equipped with high frequency, dimmable control gear
26::Equipped with LED
2::3 phase through wiring
22::The product meets the valid technical requirements applied in the countries of Europe
Technical description: 
Field of application:
Due to the construction principles of gasket, closing system and diffuser our fixtures ensure a high grade of protection (IP 65, IP 66) against dust, contamination and water permeation. In accordance with their IP grade they can be used widely to illuminate areas with dusty, humid environment. Thanks to its enhanced weather resistance, 771-Ventila is especially suitable for applications, where error-free functioning in outdoor conditions is desired.

Technical description and benefits:

Housing: It is made of flame retardant glass-fibre reinforced polyester (on request suitable for 850°C glow wire test too), in light grey (RAL7035) colour. This material has very good temperature resistance, mechanical stability, furthermore it is a good electrical insulator, it resists the impacts of several chemicals and the impacts of weather conditions. Its stability of size and shape at changing temperatures is excellent.

The diffuser is available in injection moulded acrylic (PMMA) with longitudinal internal prisms.

Main advantages: extremely high transparency (better than the transparency of glass), unique non-aging properties and weather resistance.

The diffusers are designed with respect to their optical characteristics and are UV resistant.

In order to ensure maximum heat, chemical and weather resistance even under tough conditions, the gasket between the diffuser and housing is made of silicon-based foam with enhanced durability.

Fixing of the diffuser to the body: with highly resistant stainless steel clips (standard or anti-vandal version).

Gear tray (reflector): White powder coated steel sheet according to Zhaga standards or customised.

Electrical components: in accordance with electronic control gear (T5, T8)
Technical Data: 

771-Ventila T8 T5-TD.jpg

Palletisation: 
Parameters of the mounted luminaires
 
  Length Width Height cubic centimeter cubic meter   pcs/pal. (truck) pal./truck pcs/pal. (cont.) pal./20ft cont. pal./40ft cont.
771-Ventila
1x18W  683 90 72 4425,8 0,0044   220 54 200 24 48
1x36W  1295 90 72 8391,6 0,0084   110 60 100 24 54
1x58W  1595 90 72 10335,6 0,0103   110 48 100 20 42
2x18W  683 116 72 5704,4 0,0057   176 54 160 24 48
2x36W  1295 116 72 10815,8 0,0108   88 60 80 24 54
2x58W  1595 116 72 13321,4 0,0133   88 48 80 20 42
                       
  The parameters specified (L, W, H) are given in millimeters and identical to the external of box dimensions.
  The outer box dimensions of the T5 version are same as the dimensions of the above mentioned T8 version.