Industrial dust- and waterproof luminaires
With 1 and 2 fluorescent tubes for T5 or T8 lamps
Your main benefits: A professional luminaire for wide usage, that fulfills the strongest quality requirements. Especially for applications, where high impact resistance (IK-rate) is required. Aavailable in the following sizes: 1x36W (1x1200 mm), 1x58W (1x1500 mm), 2x36W (2x1200 mm), 2x58W (2x1500 mm) in IP 65 or IP66
LED termék: 
0
UNIQUE termék: 
0
10::Dust-tight, protected against jet water
31::Protection level against external impact
14::Dust-tight
20::Protected against jet water
13::Luminaires with this mark are suitable for direct mounting on normal flammable building materials, according to DIN 4102 or similar materials, which have an ignition temperature of at least 200°C
12::Luminaires bearing this symbol have limited surface temperature and are suitable for use in premises which are susceptible to dust and fibres
30::Protected against powerful water jets (heavy seas)
5::Luminaires equipped with high frequency, dimmable control gear
26::Equipped with LED
2::3 phase through wiring
3::Luminaires with emergency module
22::The product meets the valid technical requirements applied in the countries of Europe
Technical description: 
Field of application: Due to the construction principles of gasket, closing system and diffuser our fixtures ensure a high grade of protection (IP 65 or IP66) against dust, contamination and water permeation. In accordance with their IP-grade they can be used widely to illuminate spaces with dusty, humid environment. Thanks to its enhanced impact resistance, 775-PC Line is especially suitable for applications, where high IK-rate is required.

When using outdoors, the fittings should be protected against direct sunlight and adverse weather conditions.

Housing: It is made of flame retardant injection moulded polycarbonate (PC) (on request suitable for 850°C glow wire test too), in light grey (RAL7035) colour.
This material has very high mechanical strength and allows us to reach an excellent shock resistance of IK 10.

The diffuser is available in the following versions:
For fluorescent tubes: injection moulded polycarbonate (PC), transparent, with internal prisms designed with respect to their optical characteristics.

For LED modules: injection moulded polycarbonate (PC), opal, with extremely high light permeability and well-balanced light dispersing.

Remark: As option injection moulded acrylic (PMMA) diffuser in transparent as well as in opal version is available.

The diffusers are designed with respect to their optical characteristics and are UV resistant.

The gasket between the diffuser and housing is made of non-aging PU (polyurethane) foam.
In order to ensure maximum chemical and weather resistance, silicon-based gasket with enhanced resistance is optionally available.

Fixing the diffuser to the body: with highly resistant clips made of polyamide or with stainless steel clips.

Gear tray (reflector): White powder coated steel sheet. As an option glossy aluminium reflector is possible.

Electrical components: in accordance with the requested specification: LED, low power factor, high power factor or electronic control gear.

On request available as unassembled sets (without electrical components). 

Technical Data: 

775-PC Line T8 T5-TD.jpg

Palletisation: 
Parameters of the mounted luminaires
 
  Length Width Height cubic centimeter cubic meter   pcs/pal. (truck) pal./truck pcs/pal. (cont.) pal./20ft cont. pal./40ft cont.
775-PC Line
1x36W  1295 90 72 8391,6 0,0084   110 60 100 24 54
1x58W  1595 90 72 10335,6 0,0103   110 48 100 20 42
2x36W  1295 116 72 10815,8 0,0108   88 60 80 24 54
2x58W  1595 116 72 13321,4 0,0133   88 48 80 20 42
                       
  The parameters specified (L, W, H) are given in millimeters and identical to the external of box dimensions.
  The outer box dimensions of the T5 version are same as the dimensions of the above mentioned T8 version.